PERENCANAAN STRUKTUR ATAS GEDUNG DEKANAT UNIVERSITAS MUHAMMADIYAH SUMATERA BARAT KAMPUS IV PAYAKUMBUH

Muhammad Iqbal Yuhanda, Deddy Kurniawan, Elfania Bastian

Sari


This building is one of the dean's buildings of the University of Muhammadiyah West Sumatra campus IV located in the Payakumbuh area which aims to improve educational facilities and infrastructure. To realize a safe development, careful planning is needed, so that when the building is completed and ready for the building it is safe and comfortable to use. The results obtained that the material used is steel fy = 420 MPa and concrete quality fc' = 24.9 MPa. For the reinforcement of floor slabs, reinforcement is used for the direction of x = 10 – 150, while the direction of y = 10 – 150. The planning of the columns for the 1st and 2nd floors uses steel quality fy = 420 MPa and concrete quality fc' = 24.9 MPa with K1 size 45cm x 45cm, and the 3rd floor column uses steel quality fy = 420 MPa and concrete quality fc' = 20.75 MPa with K2 size 30cm x 30cm. While planning for beam 1 with a size of 35cm x 55cm using steel quality fy = 420 MPa and concrete quality fc' = 24.9 MPa, beam 2 with a size of 25cm x 45cm using steel quality fy = 420 MPa and concrete quality fc' = 20.75 MPa, and a beam with a size of 25cm x 40cm using steel quality fy = 420 MPa and concrete quality fc' = 20.75 MPa.

 

Keywords: Building Structure, Education, Reinforcement.


Teks Lengkap:

PDF

Referensi


Amrullah, W., Bagio, T. H., & Tistogondo, J. (2019). Desain Perencanaan Struktur Gedung 38 Lantai Dengan Sistem Rangka Pemikul Momen Khusus (SRPMK). Universitas Narotama Surabaya., Surabaya.

Bastian, E. (2018). Pengaruh Jenis Tulangan Terhadap Efektifitas Kinerja Balok Beton Bertulang. Rang Teknik Journal, 1(2).

Bastian, E. Pengaruh Jenis Tulangan terhadap Efektifitas Kinerja Balok Beton Bertulang. Rang Teknik Journal, 1(2), 271217.

Budi, H. L., & Christiyanto, R. (2010). Perencanaan struktur gedung rusunawa Unimus (Doctoral dissertation, FAKULTAS TEKNIK).

Hanafi, M. B. (2015). Perencanaan Struktur Apartemen 5 Lantai+ 1 Basement Dengan Sistem Rangka Pemikul Momen Menengah (SRPMM) Di Sukoharjo (Doctoral dissertation, Universitas Muhammadiyah Surakarta).

Ichwandri, Y. P. (2014). Perencanaan Struktur Gedung Asrama Mahasiswa Universitas Sriwijaya Palembang Dengan Penahan Lateral Dinding Struktural (Doctoral dissertation, Sriwijaya University).

Karisoh, P. H., Dapas, S. O., & Pandaleke, R. E. (2018). Perencanaan Struktur Gedung Beton Bertulang dengan Sistem Rangka Pemikul Momen Khusus. Jurnal Sipil Statik, 6(6).

Lisal, I., Taufik, T., & Khadavi, K. (2019). PERENCANAAN STRUKTUR GEDUNG HOTEL DENGAN SISTEM RANGKA PEMIKUL MOMEN KHUSUS DIKOTA PADANG. Abstract of Undergraduate Research, Faculty of Civil and Planning Engineering, Bung Hatta University, 2(2).

PBI., 1971., “Tabel untuk penentuan momen plat”.

PBI., 1983., “Berat sendiri bahan bangunan dan komponen gedung. Beban hidup pada lantai gedung”.

PPPURG., 1987., “Pedoman Perencanaan Pembebanan untuk Rumah dan Gedung”.

Putra, R. S., Ridwan, A., Winarto, S., & Candra, A. I. (2020). Study Perencanaan Struktur Atas Gedung Guest House 6 Lantai Di Kota Kediri. Jurnal Manajemen Teknologi & Teknik Sipil, 3(1), 35-44.

Sintyawati, L., Winarto, S., Ridwan, A., & Candra, A. I. (2018). STUDI PERENCANAAN STRUKTUR PONDASI TIANG PANCANG GEDUNG FAKULTAS SYARIAH IAIN PONOROGO. Jurnal Manajemen Teknologi & Teknik Sipil, 1(2), 227-237.

SK SNI T-15-1991-03., “Kolom, Balok, Plat Lantai”.

SNI 03-2847-2002., “Daerah tumpuan dan lapangan Pelat dua arah”.

SNI 03-2847-2013., “Persyaratan beton struktural untuk bangunan gedung”. Struktur Beton Bertulang, Standar baru SNI 1991-03.


Refbacks

  • Saat ini tidak ada refbacks.


Anda Pengunjung Ke- Flag Counter