PERENCANAAN PEMBANGUNAN GEDUNG BARU 3 LANTAI “TABEK MAINAN” DI JALAN M.YAMIN KELURAHAN AUR KUNING KECAMATAN AUR BIRUGO TIGO BALEH KOTA BUKITTINGGI

Shinta Andira, Deddy Kurniawan, Ana Susanti Yusman

Sari


The number of buildings that collapsed was caused by the ability of a structure that was not able to support the working load, causing significant loss of property and even life. Therefore, in planning the design of a building structure, it must be really full of accuracy, careful calculations and according to the requirements with reference to the Indonesian National Standard (Indonesian Loading Regulations for Buildings and Buildings SNI-2847-2019 and SNI-1726-2019). This study aims to plan the dimensions of structural elements, calculation of structural reinforcement. The structural element data used are the results of the preliminary design (Preliminary Design). The analysis is assisted by the SAP2000 Version 11 program with the selection of a network system structure system (Grid System). Based on the results of the Preliminary design calculation, data is obtained for the use of the superstructure of the 1st floor to the 3rd floor where the cross section of the main column is 40 x 50 cm, the terrace column is 30x30 cm, the main beam is 30x40 cm, and the joist is 20x30 cm. The planning of floor slabs and also not concrete which was carried out with Preliminary design was found to be 12 cm thick. Planning for the foundation using a well foundation with a depth of 2 meters, and using a concrete buis with a diameter of 1 meter

Keywords: Preliminary design, SAP2000 analysis, reinforcement calculation, foundation bearing capacity


Teks Lengkap:

PDF

Referensi


Apriani, Widya, 2016, dalam Jurnal Pelatihan SAP2000 Dalam Perencanaan Konstruksi Gedung Beton Bertulang dan Baja Tahan Gempa Berdasarkan SNI 03-1726-2012 , Padang.

Badan Standarisasi Nasional. 2014. Baja Tulangan Beton, SK SNI 2052 : 2013.

Badan Standarisasi Nasional. 2013. Beban Minimum Untuk Perancangan Bangunan Gedung dan Strutur Lantai, SK SNI 1727 : 2013.

Badan Standarisasi Nasional. 2011. Cara Uji Kuat Tekan Beton Dengan Benda Uji Selinder, SK SNI 1974 : 2013.

Departemen Pekerjaan Umum. 1991.Tata Cara Perhitungan Struktur Beton Bangunan Gedung, SK SNI T-15-1991-03. Bandung. Yayasan Lembaga Penyelidikan Masalah Bangunan

Departemen Pekerjaan Umum. 2002. Pedoman Perencanaan Ketahanan Gempa untuk Rumah dan Gedung, SNI-1726. 2002. Jakarta. Yayasan Badan Penerbit PU

Dipohusodo, Istimawan. 1999. Struktur Beton Bertulang Berdasarkan SK SNI T-15-1991-03. Jakarta. Gramedia

Direktorat Penyelidikan Masalah Bangunan. 1984. Peraturan Perencanaan Bangunan Baja Indonesia. Bandung. Yayasan Lembaga Penyelidikan Masalah Bangunan

Dewobroto, Wiryanto. 2013. dalam Jurnal Metoda Cross dan SAP2000, teliti mana? , Universitas Semarang, Semarang.

Gideon Kusuma, Takim Andriono, 1993, Desain Struktur Rangka Beton Bertulang di Daerah Rawan Gempa, Erlangga, Jakarta.

Hamdi, Fakhril, 2016. dalam Jurnal Analisis dan Evaluasi Struktur Atas Gedung Fakultas Ekonomi dan Manajemen IPB Terhadap Faktor Gempa Berdasarkan SNI 1727:2013, Universitas IPB, Bandung.

Masagala, Algazt Arsyad. 2016. Perencanaan Struktur Beton Bertulang Tahan Gempa Berlantai 4: Studi Kasus gedung Baru Kampus I Universitas Teknologi Yogyakarta dalam Jurnal Ilmiah Semesta Teknik Volume 19 No. 1 (hlm 80-89).

Peraturan Beton Bertulang Indonesia, 1971.

Purnomo, Endi, 2010, Kajian Struktur Balok Dan Plat Beton Bertulang “Gedung Layanan Akademik Fakultas Teknik Uny” Berdasarkan Sni 03-2847-2002, Universitas Negeri Yogyakarta, Yogyakarta.

Sutanto, Febri. 2016. Analisa Perhitungan Struktur Bangunan Gedung Head Office Dan Showroom Yahama Pontianak. Pontianak.

Tjokrodimuljo, Kardiyono, Ir, ME, 1992, TEKNOLOGI BETON, Buku ajar pada Jurusan Teknik Sipil, Fakultas Teknik, Universitas Gajah Mada, Yogyakarta


Refbacks

  • Saat ini tidak ada refbacks.


Anda Pengunjung Ke- Flag Counter