PENGARUH OLI FULL-SYNTHETIC VS SEMI-SYNTHETIC TERHADAP PERFORMA SEPEDA MOTOR 4 TAK 250 CC

Dandi Wahyudi Zapit, Toto Sugiarto, Wagino Wagino, Donny Fernandez

Sari


Abstract: The right oil selection is critical in maintaining the performance of a motorcycle engine, given its role in lubrication, cooling, and reducing friction between components. This study aims to analyze the effect of semi-synthetic and full-synthetic oils on oil temperature, engine vibration, torque, and power on 4 Stroke 250 CC motorcycles to provide comprehensive information to motorcycle users about the types of oils that can optimize engine performance. The research method uses an experimental approach with a Kawasaki Ninja 250 RR Mono motorcycle as the object of study. The test was carried out at various engine revolutions (RPM) by measuring vibration using a vibration meter, temperature with a thermocouple, and torque and power through a dyno test. Data analysis uses descriptive statistics to determine significant differences between oils. The study results show that full-synthetic oil consistently provides more optimal engine performance than semi-synthetic oil. Full-synthetic produces lower vibration, maintains stable temperatures, and produces higher torque and power at each RPM. These findings indicate that full-synthetic oils can improve engine efficiency, reduce the risk of damage, and extend the life of motorcycles.

Keywords: Semi-synthetic Oil, Full-synthetic Oil, Engine Vibration, Oil Temperature, Engine Performance.


Teks Lengkap:

PDF

Referensi


Akhyan, A., & Sahata, R. (2024). Studi Eksperimental Pengaruh Jarak Tempuh Dan Temperatur Udara Sekitar Terhadap Penurunan Nilai Viskositas Oli Mesin Pada Engine 125 CC. Jurnal Teknik Mesin, 17(1), Article 1. https://doi.org/10.30630/jtm.17.1.1235

Gou, R., Chen, J., & Luo, X. (2024). Effect of different base oils on the friction behaviour of polycrystalline diamond compact. Lubrication Science, 36(4), 286–297. https://doi.org/10.1002/ls.1692

Hamzah, A. (2021). Metode Penelitian & Pengembangan (Research & Development) Uji Produk Kuantitatif dan Kualitatif Proses dan Hasil Dilengkapi Contoh Proposal Pengembangan Desain Uji Kualitatif dan Kuantitatif. CV Literasi Nusantara Abadi.

Huang, J., Li, Z., & Zhang, J. (2024). Study on vibration characteristics of the dike crossing pipeline based on EWT and CWT. Heliyon, 10(18), e37411. https://doi.org/10.1016/j.heliyon.2024.e37411

Huang, Y.-C. (2022). From government-led behaviour change to bottom-up understanding: The transition to low-carbon transport on motorcycles in Taipei, Taiwan. [PhD Thesis]. https://rgu-repository.worktribe.com/output/1880248

Mulyadi, & Nata, Y. (2021). Optimasi Penggunaan Viskositas Pelumas, Penyetelan Celah Katup, dan Celah Elektoda Busi Terhadap Emisi Gas Buang Pada Sepeda Motor. Jurnal Rekayasa Teknologi Nusa Putra, 4(2), 14–20. https://doi.org/10.52005/rekayasa.v4i2.124

Pawar, R. V., Hulwan, D. B., & Mandale, M. B. (2022). Recent advancements in synthesis, rheological characterization, and tribological performance of vegetable oil-based lubricants enhanced with nanoparticles for sustainable lubrication. Journal of Cleaner Production, 378, 134454. https://doi.org/10.1016/j.jclepro.2022.134454

Polingala, R., Apriadi, I. G. K., Annelka, E., & Amali, L. M. K. (2023). Analisa Tegangan Tembus Ac Oli Full Sintetik Dan Semi Sintetik Dengan Variasi Suhu Yang Berbeda. Jurnal Multidisiplin Indonesia, 2(5), 1767–1774. https://doi.org/10.58344/jmi.v2i8.354

Purba, R., & Tarigan, K. (2020). Pengaruh Jenis Oli Terhadap Daya dan Konsumsi Bahan Bakar Motor Kapasitas 150 CC. JURNAL ILMIAH TEKNIK SIPIL, 9(1), Article 1.

Purwanto, W., Afif, F., Lapisa, R., Yuvenda, D., Setiawan, M. Y., & Saputra, H. D. (2022). Optimasi Penggunaan Jenis Busi, Oli, Dan Campuran Ethanol Bensin Terhadap Peningkatan Suhu Dan Jarak Tempuh Sepeda Motor 4 Langkah Dengan Metode Taguchi. AEEJ : Journal of Automotive Engineering and Vocational Education, 3(2), Article 2. https://doi.org/10.24036/aeej.v3i2.150

Rudnick, L. R. (2020). Synthetics, Mineral Oils, and Bio-Based Lubricants: Chemistry and Technology. CRC Press.

Sarkar, S., Datta, D., Deepak, K. S., Mondal, B. K., & Das, B. (2023). Comprehensive investigation of various re-refining technologies of used lubricating oil: A review. Journal of Material Cycles and Waste Management, 25(4), 1935–1965. https://doi.org/10.1007/s10163-023-01685-w

Sugiarto, T., Giatman, M., Syah, N., Putra, D. S., Hidayat, N., & Baharudin, A. (2024). Jenis Pekerjaan dan Karir di Bidang Otomotif bagi Lulusan Jurusan Teknik Otomotif. PAKAR Pendidikan, 22(1), 29–37. https://doi.org/10.24036/pakar.v22i1.341

Sugiyono. (2019). Metode Penelitian Pendidikan Pendekatan Kuantitatif, Kualitatif, dan R&D. Alfabeta.

Susanto, A., Purwanto, P., Putro, E. K., Yochu, W. E., Amrina, U., & Falakh, F. (2020). Pemantauan Emisi dengan Continuous Emission Monitoring System (CEMS) dalam Pemanfaatan Minyak Pelumas Bekas Sebagai Subtitusi Bahan Bakar pada Produksi Kapur Tohor. Jurnal Ilmu Lingkungan, 18(2), 392–400. https://doi.org/10.14710/jil.18.2.392-400

Tanzeh, A., & Arikunto, S. (2020). Metode Penelitian Metode Penelitian. Metode Penelitian, 43, 22–34.

Tirmizi, S. T., Tirmizi, S. R. U. H., & Tirmizi, S. A. (2020). Mid-FTIR and Atomic Absorption Spectroscopy Based Evaluation of Oxidation Tendencies of Lubricating Oils for Effective Oil and Gas Operations. Journal homepage: http://iieta. org/journals/ijht, 38(3), 673–681.

Wagino, W., Alwi, E., Yasep Setiawan, M., Hidayat, N., Milana, M., Fernandez, D., & Padrigalan, K. E. (2024). Implementation of an Electric Turbocharger on A Single-Cylinder Spark Ignition Engine in an Effort to Use Ethanol Gasoline E40. TEM Journal, 161–166. https://doi.org/10.18421/TEM131-16

Wagino, W., Fernandez, D., Alwi, E., Putra, D. S., Afnison, W., Nanda, I., & Padrigalan, K. E. (2024). Exhaust Gas Flow Study of Electric Turbo Compounding (ETC) to Determine the Potential Electrical Energy Recovery from Exhaust Emission. TEM Journal, 1770–1778. https://doi.org/10.18421/TEM133-05

Ward, J. J. (2022). The motorcycle as identity construct and performance affect: Three real-life examples for whom transport alone was not enough. The Journal of Transport History, 43(3), 368–390. https://doi.org/10.1177/00225266221106385

Whitby, R. D. (2020). Commercial Developments. Dalam Synthetics, Mineral Oils, and Bio-Based Lubricants (3 ed.). CRC Press.

Zhmud, B., Coen, A., & Zitouni, K. (2021). Fuel Economy Engine Oils: Scientific Rationale and Controversies (SAE Technical Paper Nos. 2021-24–0067). SAE International. https://doi.org/10.4271/2021-24-0067




DOI: https://doi.org/10.33559/err.v4i2.2953

Refbacks

  • Saat ini tidak ada refbacks.


Anda Pengunjung Ke- Flag Counter