PENGARUH JUMLAH SUDU TERHADAP UNJUK KERJA PADA PROTOTYPE TURBIN ANGIN TIPE SAVONIUS
Sari
The utilization of wind energy as a renewable source is continuously being developed to produce more efficient and environmentally friendly electricity. While most current turbines are horizontal-axis models, this research focuses on the design of Savonius-type Vertical Axis Wind Turbines (VAWT). Using models with 2, 3, and 4 blades constructed from 0.8 mm mild steel plates and a swept area of 80 cm × 80 cm. The wind speed used in this study is 4.3 m/s. The research results indicate that the 4-blade turbine produces the highest power output at 53.25 watts, with a turbine rotation speed of 195 rpm
Keywords: Wind energy, wind turbine, Savonius vertical axis, electrical energy
Teks Lengkap:
PDFReferensi
Viswanathan, R., Damage Mechanisms and Life Assessment of High -Temperature Components.
ASM volume 11, Failure analysis and prevention.
Daryanto, Ilmu Metalurgy. Satu nusa, Bandung, Oktober 2010
D,N. Adnyana, Struktur dan Sifat Mekanis Material Logam, Diktat Mata Kuliah Program Pasca Sarjana (S2) ISTN Jakarta, 2003.
Christopher J, Mc Cauley, Machinery's Handbook, 29th Edition, 2012
Edin supardi, Pengujian logam. Angkasa, Bandung. 1994
N. K. Daulay, A. H. Indra, dan R. T. Ginting, "Analisis Pengaruh Jumlah Sudu terhadap Kinerja Turbin Angin Savonius," Jurnal Teknik Mesin dan Energi, vol. 4, no. 1, pp. 25-32, 2023.
A. S. Dharma, dkk., "Studi Eksperimental Performansi Turbin Angin Savonius dengan Variasi Jumlah Sudu untuk Skala Mikro," Jurnal Rekayasa Mesin, vol. 12, no. 2, pp. 445-452, 2021.
M. F. Hanafi dan S. S. Prayogo, "Optimasi Desain Turbin Angin Vertical Axis Savonius Sebagai Pembangkit Listrik Alternatif," Jurnal Energi dan Teknologi Manufaktur (JETM), vol. 5, no. 1, pp. 15-20, 2022.
DOI: https://doi.org/10.33559/err.v5i3.3851
Refbacks
- Saat ini tidak ada refbacks.
Anda Pengunjung Ke-



