SIFAT MEKANIK, KETAHANAN AUS, DAN KOROSI LAPISAN COLD SPRAY PADUAN LOGAM: SLR

Muhammad Khalikul Fadly, Donny Fernandez, Muslim Muslim, Toto Sugiarto

Sari


Abstract: Cold spray is a rapidly advancing solid-state deposition technology for coating and repairing metal-alloy components, valued for minimizing oxidation and phase transformation compared to conventional thermal spray. This study analyzes research trends on mechanical properties, wear resistance, corrosion, and fatigue/fracture mechanisms of cold-sprayed metal-alloy coatings from 2020-2025 publications, using a Systematic Literature Review (SLR) guided by PRISMA 2020. Literature searching via Publish or Perish on the Scopus database yielded 200 initial records; after title screening and eligibility assessment, 18 articles met the inclusion criteria for synthesis. Results show: (1) research concentrated in 2020 (9 of 18 articles, 50.0%) with consistently high citation impact across the period; (2) research focus was dominated by wear/tribological behavior studies (33.3%), followed by microstructure and process modeling and general application reviews (16.7% each); (3) hard reinforcing phases (WC, TiC, CoCr) consistently improved wear resistance, while residual porosity and inter-particle bonding quality remained dominant factors affecting fatigue, fracture, and corrosion performance. VOSViewer bibliometric analysis revealed close linkage among eight key terms within one coherent thematic cluster. This study concludes that optimizing process parameters to minimize porosity and maximize inter-particle bonding is the most crucial direction for future structural applications of cold spray coatings/repairs on metal alloys.

Keywords: Cold Spray; Fatigue And Fracture Mechanism; Wear Resistance; Corrosion; Metal Alloy.


Teks Lengkap:

PDF

Referensi


Alidokht, S. A., dkk. (2021). Sliding wear behavior of cold-sprayed Ni-WC composite coatings: Influence of WC content. Wear, 477, Article 203792. https://doi.org/10.1016/j.wear.2021.203792

Bortolussi, V., dkk. (2020). Electrical conductivity of metal-polymer cold spray composite coatings onto carbon fiber-reinforced polymer. Journal of Thermal Spray Technology, 29(4), 642-656. https://doi.org/10.1007/s11666-020-00999-7

Braun, V., & Clarke, V. (2006). Using thematic analysis in psychology. Qualitative Research in Psychology, 3(2), 77-101. https://doi.org/10.1191/1478088706qp063oa

Della Gatta, R., dkk. (2022). Cold spray deposition of metallic coatings on polymers: A review. Journal of Materials Science, 57(1), 27-57. https://doi.org/10.1007/s10853-021-06561-2

Kitchenham, B., Budgen, D., Brereton, P., Turner, M., Charters, S., & Linkman, S. (2007). Large-scale software engineering questions - expert opinion or empirical evidence? IET Software, 1(5), 161-171. https://doi.org/10.1049/iet-sen:20060052

Kumar, S., dkk. (2022). Influence of processing conditions on the mechanical, tribological and fatigue performance of cold spray coating: A review. Surface Engineering, 38(4), 324-365. https://doi.org/10.1080/02670844.2022.2073424

Li, W., dkk. (2020). Solid-state cold spraying of Ti and its alloys: A literature review. Progress in Materials Science, 110, Article 100633. https://doi.org/10.1016/j.pmatsci.2019.100633

Liu, T., dkk. (2020). Quantifying dislocation density in Al-Cu coatings produced by cold spray deposition. Acta Materialia, 193, 115-124. https://doi.org/10.1016/j.actamat.2020.04.040

Liu, Z., dkk. (2020). Prediction of heterogeneous microstructural evolution in cold sprayed copper coatings using local Zener-Hollomon parameter and strain. Acta Materialia, 193, 191-201. https://doi.org/10.1016/j.actamat.2020.04.041

Mohankumar, A., dkk. (2022). Optimization of cold spray process inputs to minimize porosity and maximize hardness of metal matrix composite coatings on AZ31B magnesium alloy. Journal of Nanomaterials, 2022, Article 7900150. https://doi.org/10.1155/2022/7900150

Munagala, V. N. V., dkk. (2020). Sliding wear of cold sprayed Ti6Al4V coatings: Effect of porosity and normal load. Wear, 450, Article 203268. https://doi.org/10.1016/j.wear.2020.203268

Munagala, V. N. V., dkk. (2021). The role of metal powder properties on the tribology of cold sprayed Ti6Al4V-TiC metal matrix composites. Surface and Coatings Technology, 411, Article 126974. https://doi.org/10.1016/j.surfcoat.2021.126974

Page, M. J., dkk. (2021). The PRISMA 2020 statement: An updated guideline for reporting systematic reviews. BMJ, 372, n71. https://doi.org/10.1136/bmj.n71

Sample, C. M., dkk. (2020). Factors governing static properties and fatigue, fatigue crack growth, and fracture mechanisms in cold spray alloys and coatings/repairs: A review. Additive Manufacturing, 36, Article 101371. https://doi.org/10.1016/j.addma.2020.101371

Silvello, A., dkk. (2022). Microstructural, mechanical and wear behavior of HVOF and cold-sprayed high-entropy alloys (HEAs) coatings. Journal of Thermal Spray Technology, 31(4), 1184-1206. https://doi.org/10.1007/s11666-021-01293-w

Tan, A. W. Y., dkk. (2020). Microstructure, mechanical and tribological properties of cold sprayed Ti6Al4V-CoCr composite coatings. Composites Part B: Engineering, 202, Article 108280. https://doi.org/10.1016/j.compositesb.2020.108280

van Eck, N. J., & Waltman, L. (2009). Software survey: VOSviewer, a computer program for bibliometric mapping. Scientometrics, 84(2), 523-538. https://doi.org/10.1007/s11192-009-0146-3

Xie, X., dkk. (2020). Corrosion behavior of cold sprayed 7075Al composite coating reinforced with TiB2 nanoparticles. Surface and Coatings Technology, 404, Article 126460. https://doi.org/10.1016/j.surfcoat.2020.126460

Xue, N., dkk. (2023). Comparison of cold-sprayed coatings of copper-based composite deposited on AZ31B magnesium alloy and 6061 T6 aluminum alloy substrates. Materials, 16(14), Article 5120. https://doi.org/10.3390/ma16145120

Yeom, H., dkk. (2021). Cold spray technology in nuclear energy applications: A review of recent advances. Annals of Nuclear Energy, 150, Article 107835. https://doi.org/10.1016/j.anucene.2020.107835

Zhang, M., dkk. (2025). Cold sprayed Cu-coated AlN reinforced copper matrix composite coatings with improved tribological and anticorrosion properties. Surface and Coatings Technology, 496, Article 131666. https://doi.org/10.1016/j.surfcoat.2024.131666

Zhang, Y., dkk. (2020). Mechanical, tribological and corrosion physiognomies of CNT-Al metal matrix composite (MMC) coatings deposited by cold gas dynamic spray (CGDS) process. Surface and Coatings Technology, 403, Article 126380. https://doi.org/10.1016/j.surfcoat.2020.126380




DOI: https://doi.org/10.33559/err.v5i3.4033

Refbacks

  • Saat ini tidak ada refbacks.


Anda Pengunjung Ke- Flag Counter