TINJAUAN PELAKSANAAN PEKERJAAN PONDASI BORED PILE ABUTMENT 1 PADA PROYEK PEMBANGUNAN FLY OVER GELUMBANG

M. Arpando Eko Wianto, Farlin Rosyad

Sari


A bored pile foundation is a deep foundation that has a tube-like shape and is made from a reinforced concrete mixture with certain diameter dimensions. Bored piles can be installed into the ground by drilling the ground first, then filling with reinforcement and casting concrete. The function of the foundation is to place the building and transmit the distributed load, so the foundation structure of the bottom of the building is directly connected to the ground and functions to support all loads, both live loads and dead loads above it and external forces. This flyover is a substructure work, including bored pile foundations, abutments and pillars. One of the most important structural parts is the foundation on the bored pile.

Keywords: Bored Pile Foundation for Fly Over construction


Teks Lengkap:

PDF

Referensi


Bowles, K, E. 1992. Analisis Dan Desain Fondasi. Jilid , Edisi keempat: Erlangga. Jakarta.

Girsang P., 2009. Analisa Daya Dukung Pondasi Bored Pile pada Proyek Gedung Crystal Squere Jalan Imam Bonjol. No.6 Medan: Universitas Sumatera Utara.

Supriyadi, Bambang dan Muntohar, Agus S., 2007, Jembatan, Beta Offset, Yogyakarta.

Kementrian Pekerjaan Umum. 2017. Modul 4 - Produksi dan Pengangkutan Campuran Beton. Bandung: Kementrian Pekerjaan Umum.

Haryadi & Prakoso Widjojo Adi. 2023. Analisis Statistik Hasil Uji Kapasitas Metode Dinamis ( PDA TEST ) Pada Pondasi Tiang Pancang Sistem Pancang Tekan. Jurnal: Wahana Teknik Sipil. Vol. 28, No. 1, Juni 2023.




DOI: https://doi.org/10.33559/eoj.v6i3.2281

Refbacks

  • Saat ini tidak ada refbacks.


Jumlah Kunjungan

Negara Pengunjung

Flag Counter

Lisensi Creative Commons
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi 4.0 Internasional.