RANCANG BANGUN ROBOT PENGANGKUT BARANG DENGAN KOMBINASI SENSOR ULTRASONIK DAN BLUETOOTH MODULE

Fauzia Ichtiaratul Rizqi, Najwa Sheila Kamilia Arzaq, Riska Yohanari, Sahli Tri Atmaja, Tateng Sukendar

Sari


This study presents the design and prototype of a low‑cost cargo‑carrying robot based on Arduino Uno, integrating an HC‑SR04 ultrasonic sensor for obstacle detection and an HC‑05 Bluetooth module for wireless control. DC motors driven by an L298N/L293D provide locomotion, powered by two 3.7 V batteries. The work covers hardware design, firmware development, and prototype testing in a confined environment. Experimental results show reliable obstacle detection and effective remote control, with acceptable load‑carrying capability despite limitations in motor power and sensor response. The prototype serves as a foundation for improved control algorithms and power optimization.

Keywords: Mobile robot; Obstacle avoidance; Wireless control; Arduino Uno


Teks Lengkap:

PDF

Referensi


Arduino Nano Board Guide (Pinout, Specifications, Comparison)

Ładowarka Jomardyan Ładowarka Li-ion 18650 BMS 2S 3A 7,4V 8,4V - Sklep, Opinie, Cena w Allegro

Buy USB PD Power Trigger Module PDC004-PD | Makerbazar

Generic | XL6009 DC to DC Step Up Converter Module - High Efficiency Power Conversion for Electronics, Adjustable Voltage Range, Compact Design : Amazon.in: Computers & Accessories

Gear Motors and Wheels for Arduino Robot Car| Remote car Project | Daraz.lk

Bluetooth Module HC-05 With Arduino: A Complete Guide - ArduinoYard

Ultrasonic Sensor - HC-SR04 - HC-SR04

L298N Motor Driver Module | Open ImpulseOpen Impulse

ATMEGA328p Microcontroller




DOI: https://doi.org/10.33559/eoj.v8i11.4015

Refbacks

  • Saat ini tidak ada refbacks.


Jumlah Kunjungan

Negara Pengunjung

Flag Counter

Lisensi Creative Commons
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi 4.0 Internasional.