PEMANFAATAN PANAS KNALPOT YANMAR TS190H MELALUI HEAT EXCHANGER: TINJAUAN SISTEMATIS

Agay Priadi, Rifdarmon Rifdarmon, Martias Martias, Iffarial Nanda

Sari


Abstract: This systematic review examines the technical basis for recovering exhaust heat from the Yanmar TS190H diesel engine through a heat exchanger and identifies variables that should guide prototype testing. Thirteen primary studies published between 2020 and 2026 were selected through PRISMA-oriented screening and evaluated for methodological clarity and relevance. Evidence was organized around exhaust-heat characteristics, operating parameters, exchanger geometry, backpressure, fouling, and direct water heating. Because engine scales, methods, and performance indicators differed substantially, the findings were synthesized narratively. Exhaust temperature and mass flow, engine load, water flow rate, pipe dimensions, heat-transfer area, flow arrangement, and exhaust resistance consistently governed system performance. A double-pipe or concentric-tube counterflow configuration emerged as the most practical starting point because it combines simple fabrication, cleaning access, and controllable pressure loss. The review proposes a Yanmar TS190H-specific thermal–hydraulic operating window to integrate heat recovery, pressure constraints, and maintainability before experimental validation.

Keywords: heat exchanger, diesel exhaust heat, Yanmar TS190H, water heating, systematic review.


Teks Lengkap:

PDF

Referensi


Aiello, V. C., Kini, G., Staedter, M. A., & Garimella, S. (2020). Investigation of fouling mechanisms for diesel engine exhaust heat recovery. Applied Thermal Engineering, 181, 115973. https://doi.org/10.1016/j.applthermaleng.2020.115973

Ali, S., Alsayah, A. M., Kadhim, S. A., Fahs, M., Faraj, J., Khaled, M., Salameh, T., & Alkasrawi, M. (2025). Parametric thermodynamic and exergo-environmental analysis of a concentric-tube heat exchanger for exhaust-gas heat recovery. Energy Conversion and Management: X, 27, 101155. https://doi.org/10.1016/j.ecmx.2025.101155

Di Battista, D., Di Prospero, F., Di Giovine, G., Fatigati, F., & Cipollone, R. (2025). Dual-stage energy recovery from internal combustion engines. Energies, 18(3), 623. https://doi.org/10.3390/en18030623

Donateo, T., Cutuli, P., Vilotta, N., Algieri, A., & Morrone, P. (2024). Analysis of the heat content of exhaust gases from a heavy-duty diesel engine under real-world driving conditions and cold start operation. Journal of Physics: Conference Series, 2893(1), 012103. https://doi.org/10.1088/1742-6596/2893/1/012103

Harrison, R., Jones, B., Gardner, P., & Lawton, R. (2021). Quality assessment with diverse studies (QuADS): An appraisal tool for methodological and reporting quality in systematic reviews of mixed- or multi-method studies. BMC Health Services Research, 21, 144. https://doi.org/10.1186/s12913-021-06122-y

Jiang, D., Yu, H., Wang, Z., Glowacz, A., Królczyk, G., & Li, Z. (2023). Influence of exhaust temperature and flow velocity of marine diesel engines on exhaust gas boiler heat transfer performance. Sustainability, 15(1), 753. https://doi.org/10.3390/su15010753

Luo, L., Fan, Y., Wang, Y., Ni, P., Zhang, X., & Xi, G. (2023). Experiment study on the exhaust-gas heat exchanger for small and medium-sized marine diesel engine. Energy Engineering, 120(1), 125–145. https://doi.org/10.32604/ee.2022.022295

Martos, F. J., Soriano, J. A., Braic, A., Fernández-Yáñez, P., & Armas, O. (2023). A CFD modelling approach for the operation analysis of an exhaust backpressure valve used in a Euro 6 diesel engine. Energies, 16(10), 4112. https://doi.org/10.3390/en16104112

Nguyen, N.-H., Lee, D.-Y., Garud, K. S., & Lee, M.-Y. (2021). Energy saving and economic evaluations of exhaust waste heat recovery hot water supply system for resort. Symmetry, 13(4), 624. https://doi.org/10.3390/sym13040624

Orido, G. O., Ronoh, E. K., Ajwang, P. O., & Gathitu, B. B. (2023). Performance assessment of hybrid recuperative heat exchanger for diesel engine generated exhaust gas. International Journal of Thermofluids, 19, 100392. https://doi.org/10.1016/j.ijft.2023.100392

Page, M. J., McKenzie, J. E., Bossuyt, P. M., Boutron, I., Hoffmann, T. C., Mulrow, C. D., Shamseer, L., Tetzlaff, J. M., Akl, E. A., Brennan, S. E., Chou, R., Glanville, J., Grimshaw, J. M., Hróbjartsson, A., Lalu, M. M., Li, T., Loder, E. W., Mayo-Wilson, E., McDonald, S., McGuinness, L. A., Stewart, L. A., Thomas, J., Tricco, A. C., Welch, V. A., Whiting, P., & Moher, D. (2021). The PRISMA 2020 statement: An updated guideline for reporting systematic reviews. BMJ, 372, n71. https://doi.org/10.1136/bmj.n71

Rasheed, R. H., Ali, S., Alsayah, A. M., Alshukri, M. J., Kadhim, S. A., Faraj, J., Castelain, C., Fahs, M., & Khaled, M. (2026). Comprehensive 4E assessment of diesel exhaust waste heat recovery for domestic water preheating using a concentric-tube heat exchanger. Energy Conversion and Management: X, 30, 101731. https://doi.org/10.1016/j.ecmx.2026.101731

Sahu, M. K., Singh, A. K., & Choudhary, T. (2022). Experimental investigation of thermal potential at diesel engine exhaust and numerical simulation of heat recovery in heat exchangers. Materials Today: Proceedings, 56, 220–225. https://doi.org/10.1016/j.matpr.2022.01.076

Soundararajan, S., & Selvaraj, M. (2023). Investigations of protracted finned double pipe heat exchanger system for waste heat recovery from diesel engine exhaust. Thermal Science, 27(5A), 3783–3793. https://doi.org/10.2298/TSCI230212143S

Towhid, M. S. A., Islam, M. R., Khalikujjaman, M., & Costa, B. T. (2025). Waste heat recovery-based seawater desalination for sustainable maritime operations: A study on heat transfer, techno-economic feasibility, and environmental impact. Journal of ETA Maritime Science, 13(3), 260–276. https://doi.org/10.4274/jems.2025.76259




DOI: https://doi.org/10.33559/err.v5i3.4034

Refbacks

  • Saat ini tidak ada refbacks.


Anda Pengunjung Ke- Flag Counter